Transaxle - Overhaul: Notes

SPECIAL TOOLS

Courtesy of FORD MOTOR CO.	Collet, 7/8 Inch to 1 Inch 303-D020 (D80L-100-R) or equivalent
Courtesy of FORD MOTOR CO.	Compressor, Forward Clutch Spring 307-574 (includes 307-574/1 and 307-574/2)
Courtesy of FORD MOTOR CO.	Compressor, Forward/Intermediate Spring 307-584 (includes 307-584/1 and 307-584/2)
Courtesy of FORD MOTOR CO.	Compressor, Overdrive Clutch, Balance Piston and Direct Clutch 307-589 (includes 307-589/1 and 307-589/2)
Courtesy of FORD MOTOR CO.	Converter Seal Installer 307-575
Courtesy of FORD MOTOR CO.	Depth Micrometer 303-D075 (D92P-4201-A) or equivalent
Courtesy of FORD MOTOR CO.	Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
Courtesy of FORD MOTOR CO.	Handle 205-153 (T80T-4000-W)
Courtesy of FORD MOTOR CO.	Holding Fixture 307-580
Courtesy of FORD MOTOR CO.	Input Shaft Support Seal Installer (Back Plate, Multiple Rings) 307-578 (includes 307-578/1, 307-578/2 and 307-578/3)
Courtesy of FORD MOTOR CO.	Installer, Cover Axle Seal 307-582A
Courtesy of FORD MOTOR CO.	Manual Lever Seal Installer 307-581
Courtesy of FORD MOTOR CO.	Retainer, Torque Converter 307-566
Courtesy of FORD MOTOR CO.	Reverse Clutch Piston and Retaining Ring Set 307-588 (includes 307-588/1, 307-588/2 and 307-588/3)
Courtesy of FORD MOTOR CO.	Slide Hammer 100-001 (T50T-100-A)
Courtesy of FORD MOTOR CO.	Support Seal Installer 307-585
Courtesy of FORD MOTOR CO.	Support Solid Seal Installer (Single Seal) 307-579 (includes 307-579/1, 307-579/2 and 307-579/3)

MATERIAL SPECIFICATIONS

Item	Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC	MERCON® LV
Ultra Silicone Sealant TA-29	-