Accessory Protocol Interface Module (APIM) Programming - 8-Inch (203 mm) Touchscreen: Notes

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The APIM for this vehicle requires specific programming procedures for correct operation. APIM programming is required when:

APIM is replaced
- Programming is required when the APIM is replaced.
Directed by a Technical Service Bulletin (TSB)
- Updates to resolve SYNC® performance concerns should only be performed when directed by a TSB .
Upgrades are requested
- Occasional upgrades and/or new applications can be programmed when they become available. This type of programming is available upon customer request and expense.

There are 3 types of APIM programming available:

Module Replacement - used when the APIM has been replaced. This type of programming performs the required provisioning.
Standard - used to update the APIM and any currently installed Applications to the latest software level.
Custom - shows all available software options (including Applications that may not have been previously installed) that can be programmed into the APIM . Use this selection when upgrades become available or as directed by a Technical Service Bulletin (TSB).