DTC P0C2F: Internal Control Module Drive Motor/Generator/Engine Speed Sensor Performance

P0C2F - INTERNAL CONTROL MODULE DRIVE MOTOR/GENERATOR/ENGINE SPEED SENSOR PERFORMANCE

Description: The powertrain control module (PCM) monitors the generator speed circuits, the motor speed circuits, and the engine speed. If the PCM detects a concern identifying an issue with the motor, generator or engine speed sensors, this DTC is set.
Possible Causes: Generator speed circuits Engine speed sensor circuits Vehicle speed sensor (VSS) circuits Motor speed circuits
Diagnostic Aids: When this DTC sets, the powertrain malfunction indicator (wrench) will illuminate and the vehicle will go into limited operation strategy (LOS) supercreep mode. Refer to TORQUE-BASED ELECTRONIC THROTTLE CONTROL (ETC) , ETC System Failure Mode Effects Management (FMEM), LOS supercreep for additional information.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST JD .