Component Testing Procedure
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 3 and 12 | Tilt | Closed circuit |
| Slide | 8 and 12 | Close | Closed circuit |
| 6 and 12 | Open | Closed circuit | |
| 3 and 12 | Auto open | Closed circuit | |
| Sunshade | 9 and 12 | Open | Closed circuit |
| 4 and 12 | Close | Closed circuit |