LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2014 >> MKT Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Information System And Entertainment System - Am/Fm/Cd) >> Removal And Installation >> Accessory Protocol Interface Module (APIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the glove compartment completely.
  2. Disconnect the APIM electrical connector and the Universal Serial Bus (USB) cable electrical connector.
  3. Remove the RH instrument panel side trim panel. For additional information, refer to Instrument Panel - Exploded View in INSTRUMENT PANEL AND CONSOLE .
  4. Remove the 2 screws and the APIM.
    • Remove the APIM through the glove compartment opening.
  5. To install, reverse the removal procedure.
    • If a new APIM is being installed, program the APIM to the correct software level. For additional information, refer to MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals