Pinpoint Test U : The Sod-R Does Not Respond To The Scan Tool: Notes
WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Module Communications Network , for schematic and connector information.
Refer to Vehicle Emergency Messaging System , for schematic and connector information.
Normal Operation and Fault Conditions
The Side Obstacle Detection Control Module - Right (SOD-R) communicates with the scan tool through the Medium Speed Controller Area Network (MS-CAN).
Visual Inspection and Diagnostic Pre-checks
Verify BCM fuse 34 (10A) is OK.
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- SOD-R