DTC U210A: Temperature Sensor: Action
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
This DTC sets due to an internal short to ground or short to voltage which causes an over-temperature condition in the clockspring tape circuits. CARRY OUT the SASM Module Reset routine. CYCLE the ignition from ON to OFF and back to ON. CLEAR the DTC and then CARRY OUT the SASM self-test. If the DTC returns, INSTALL a new SASM - clockspring assembly. REFER to the appropriate Removal and Installation procedure in the Supplemental Restraint System article.