Pinpoint Test B : The TCM (Transmission Control Module) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Refer to Transmission Controls - 6R100 for schematic and connector information.
Refer to Transmission Controls - TorqShift 6 for schematic and connector information.
Normal Operation and Fault Conditions
The TCM communicates with the diagnostic scan tool through the HS-CAN1 (diesel engine only).
Possible Sources
- Fuse
- Wiring, terminals and connectors
- TCM
Visual Inspection and Diagnostic Pre-checks
Verify BJB fuses 33 (10A) and 94 (15A) are OK.