LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2019 >> MKT Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 6F50/6F55 >> Disassembly And Assembly Of Subassemblies >> Torque Converter Housing >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Converter Housing: Disassembly

  1. Special Tool(s): Remover/Installer, Front Wheel Hub 204-069, Transfer Gear Bearing Race Remover 307-577
    GFD93448Courtesy of FORD MOTOR COMPANY
  2. GFD93449Courtesy of FORD MOTOR COMPANY
  3. Punch a hole in the fluid dam. Center punch.
    GFD93450Courtesy of FORD MOTOR COMPANY
  4. General Equipment: Dent Puller
    GFD93451Courtesy of FORD MOTOR COMPANY
  5. Special Tool(s): Differential Bearing Cup Remover 307-586

    1. Position the Differential Bearing Cup Remover 307-586 in the torque converter housing with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the torque converter housing.
    2. Expand the Differential Bearing Cup Remover 307-586 by hand.
    3. While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the torque converter housing, tighten the nut.

    GFD93452Courtesy of FORD MOTOR COMPANY
  6. General Equipment: Shop Press
    GFD93453Courtesy of FORD MOTOR COMPANY
  7. GFD93454Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals