Pinpoint Test G : The Steering Column Control Module (SCCM) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2018 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Refer to Cruise Control for schematic and connector information.
Normal Operation and Fault Conditions
The SCCM communicates with the diagnostic scan tool through the HS-CAN2.
Possible Causes
- Fuse
- Wiring, terminals and connector
- SCCM
Visual Inspection and Diagnostic Pre-checks
Verify BCM fuse 13 (7.5A) is OK.