LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (Climate Control) >> Removal And Installation >> In-Vehicle Temperature and Humidity Sensor >> Removal And Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation

WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 steering column opening trim panel screws.
  2. Detach the in-vehicle temperature sensor from the steering column opening trim panel and remove the steering column opening trim panel.

    • Disconnect the electrical connector.

  3. Disconnect the in-vehicle temperature sensor electrical connector.
  4. Rotate the in-vehicle temperature sensor clockwise to disconnect it from the aspirator hose and remove the in-vehicle temperature sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals