DTC U210A: Temperature Sensor: Action
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
This DTC sets due to an internal short to ground or short to voltage which causes an over-temperature condition in the clockspring tape circuits. CARRY OUT the SASM Module Reset routine. CYCLE the ignition from ON to OFF and back to ON. CLEAR the DTC and then CARRY OUT the SASM self-test. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article.