LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2020 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Perimeter Anti-Theft Alarm System) >> Removal And Installation >> Intrusion Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intrusion Sensor: Installation

WARNING: This page is about a different car, the 2018 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, carry out the LIN New Module Initialization procedure (Toolbox>Electrical>Service Functions>LIN New Module Initialization).

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.

scientia non olet · About LEMON Manuals