DTC Chart: Body Control Module (BCM)
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| DTC | Description | Action |
|---|---|---|
| B1175:01 | Driver Door Ajar Switch: General Electrical Failure | GO to Pinpoint Test C |
| B1176:01 | Passenger Door Ajar Switch: General Electrical Failure | GO to Pinpoint Test C |
| B11C0:01 | Driver Side Rear Door Ajar Switch: General Electrical Failure | GO to Pinpoint Test C |
| B11C1:01 | Passenger Side Rear Door Ajar Switch: General Electrical Failure | GO to Pinpoint Test C |
| B12C2:11 | Puddle Lamp: Circuit Short To Ground | GO to Pinpoint Test K |
| B12C2:15 | Puddle Lamp: Circuit Short To Battery or Open | GO to Pinpoint Test K |
| B1306:01 | Liftgate Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C If the courtesy lamps are always off, GO to Pinpoint Test J |
| B1313:11 | Interior Lighting Output: Circuit Short To Ground | GO to Pinpoint Test B |
| B1313:15 | Interior Lighting Output: Circuit Short To Battery or Open | If the interior courtesy lamps are always on, GO to Pinpoint Test D If the interior courtesy lamps are inoperative, GO to Pinpoint Test B |
| B145C:11 | Ambient Lighting Power Supply Output: Circuit Short To Ground | GO to Pinpoint Test G |
| B145C:15 | Ambient Lighting Power Supply Output: Circuit Short To Battery or Open | GO to Pinpoint Test G |
| B1465:00 | Ambient Lighting Bus 1: No Sub Type Information | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test G If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| B1467:00 | Ambient Lighting Bus 3: No Sub Type Information | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test G If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| B14AA:11 | Demand Lamp Output: Circuit Short To Ground | GO to Pinpoint Test E |
| B14AA:15 | Demand Lamp Output: Circuit Short To Battery or Open | GO to Pinpoint Test E |
| For other BCM Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) . |