1975 Models & 1976-77 Federal 1600cc Man. Trans. Equipped Models (Accelerator Switch Test)
- Unplug accelerator switch connector. Connect ohmmeter to switch connector terminals and check continuity.
- With pedal released, continuity should exist (switch is on). With pedal depressed, no continuity should exist (switch is off). To adjust accelerator switch, ensure throttle valve is fully closed.
- Loosen switch adjusting screw completely. Now slowly tighten screw until continuity is made. Tighten screw and additional 1 1/2 turns. On GLC, models continuity should no longer exists past 3/4 depression of accelerator pedal.