All Other Models

With vehicle raised and supported under lower control arms, remove wheel. On RX7 and pickup models, tighten nut until wheel locks. On all other models, torque wheel nut to 14-18 ft.lbs. (2-2.5 mkg). On all models, rotate hub to seat bearings. Loosen nut, then using spring tension gauge, tighten nut until correct starting force is obtained. Starting force should be 0.77 - 1.92 lbs. (0.35 - 0.87 kg) on 626 0.99 - 1.43 lbs. (0.45 - 0.65 kg) on RX7, or 1.3 - 2.4 lbs. (0.59 - 1.1 kg) on pickup.