LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1984 >> B2000 SE-5, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Air Injection System - CALIF >> Component Testing >> Water THERMO Switch >> A/T Models
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

A/T Models

Remove water thermo switch from radiator. Immerse base of switch in container of cold water. Connect ohm meter across switch terminals. Gradually heat water and observe temperature at which circuit opens. Standard temperature should be between 59.4-66.6°F (15-19°C).

scientia non olet · About LEMON Manuals