Fuel Sending Unit
Resistance should measure 3 ohms with float at full raised position. At the mid range position, resistance should measure approximately 32.5 ohms. With float lowered to empty position, ohmmeter should register about 110 ohms. If not, replace sending unit.
RESISTANCES FOR FUEL GAUGE TESTING
| Needle Position | Test Resistor | ||||
|---|---|---|---|---|---|
| Full Line | (1) 7 ohms | ||||
| Half Tank | 33 ohms | ||||
| Empty Line | (2) 95 ohms | ||||
|
|||||