Specifications Index
626 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | NA | ||
| Axle Nut/Hub Nut | 174-231 Ft. Lbs. (236-314 N.m) | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | GENERATOR & REGULATOR | ||
| Torque | NA | ||
| Drive Belts | |||
| Adjustment | DRIVE BELT ADJUSTMENT | ||
| Belt Routing | See appropriate graphic under DRIVE BELT ROUTING . | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | |||
| 2.0L 4-Cyl. | 13.6-17.7 psi (0.95-1.25 kg/cm (2)) | ||
| 2.5L V6 | 11-15 psi (0.75-1.05 kg/cm (2)) | ||
| Thermostat R & I | NA | ||
| Water Pump R & I | |||
| 2.0L 4-Cyl. | WATER PUMP | ||
| 2.5L V6 | WATER PUMP | ||
| Engine Mechanical | |||
| 2.0L 4-Cyl. | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | 57-71 psi (4-5 kg/cm (2)) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 2.5L V6. | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | 48-71 psi (3.4-5.0 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.0L 4-Cyl. | 45-49 Ft. Lbs. (61-67 N.m) | ||
| 2.5L V6 | 71-76 Ft. Lbs. (97-102 N.m) | ||
| Fuel System | |||
| Pressure Specification | 38-46 psi (2.7-3.2 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE (EXCEPT B2500, B3000 & B4000) | ||
| Fuel Filter Location and R & I | REMOVAL & INSTALLATION -- 626 | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.0L 4-Cyl. | See appropriate graphic under FIRING ORDER . | ||
| 2.5L V6 | See appropriate graphic under FIRING ORDER . | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | NA | ||
| Spark Plug | |||
| 2.0L 4-Cyl. (NGK BKR5E-11 or BKR6E-11 | |||
| Gap | .040-.043 in, (.7-.8 mm) | ||
| Torque | 11-16 Ft. Lbs. (15-22 N.m | ||
| 2.5L V6 (NGK PKJ16CR8 or NGK PKJ20CR8) | |||
| Gap | .028-.031 in, (.7-.8 mm) | ||
| Torque | 11-16 Ft. Lbs. (15-22 N.m) | ||
| Starting | |||
| Starter | DESCRIPTION & OPERATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 66-86 Ft. Lbs. (89-117 N.m) | ||