LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1987 >> B2000 Base, 2D Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Component Testing >> Front Wiper Motor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wiper Motor

  1. Apply battery voltage to terminal "B". SeeFig 1 . Ground terminal "A" and motor should operate at low speed. Ground terminal "C" and motor should operate at high speed.
  2. Operate motor at low speed and check for conductivity between terminals "B" and "D". SeeFig 1 . Terminals "B" and "D" should become conductive once per revolution. Continue operating motor at low speed and check for conductivity between terminals "D" and "E". Terminals "D" and "E" should become non-conductive once per revolution.
  3. Connect battery voltage to "A" terminal and ground "B" terminal. Motor should operate.
Fig 1: Mazda B2200, B2600 Front Wiper Motor Circuit
G68216Courtesy of MAZDA MOTORS CORP.
Fig 2: Rear View of Wiper Motor Terminal Connector
G68219Courtesy of MAZDA MOTORS CORP.
Fig 3: Front View of Wiper Motor Terminal Connector
G68218Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals