Air Flow Meter/Sensor: Service and Repair

Airflow Meter Removal:

1. Disconnect the airflow meter connector.
2. Remove the air hose.
3. Remove the air cleaner cover together with the airflow meter.
4. Remove the airflow meter and the gasket.
5. Mount the gasket onto the air cleaner housing, being sure that the holes B are fit over pins A.
6. Make sure the top pointer of the gasket faces upward.
7. Install the airflow meter.

Airflow Meter Installation:

TORQUE: 69 - 95 in.lb. (7.8 - 11Nm)

CAUTION: If nuts are tightened below specified torque, the nuts may loosen and cause damage to the engine.