LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1990 >> B2600i Base, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EFI >> Miscellaneous Controls >> A/C Cut-Out Control System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Cut-Out Control System

  1. Turn A/C, blower and ignition switches on. DO NOT start engine. Shift transmission into a drive gear. Open throttle fully. Listen for A/C clutch disengaging and re-engaging after a few seconds. See A/C CUTOUT TIME SPECIFICATIONS  table.
  2. If system does not perform as specified, check operations of related switches and relays. See PIN VOLTAGE CHART S and SENSOR RANGE CHARTS articles in the ENGINE PERFORMANCE section.
A/C CUTOUT TIME SPECIFICATIONS

Application Time Before Re-engagement
B2200, B2600i 10 Seconds
scientia non olet · About LEMON Manuals