Except Navajo
- Start engine. On B2200 PFI, B2600i, Miata,MX-6, 626 and 929, disconnect circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table. On MPV 3.0L, disconnect airflow sensor connector.
- On all other models, disconnect fuel pump connector near fuel tank (on MX-3, Protege and 323, fuel pump connector is accessible from under rear seat cushion).
- On all models, allow engine to run until it stalls. Turn ignition off. Reconnect electrical connector.
CIRCUIT OPENING RELAY LOCATION
| Application | Location |
|---|---|
| B2200 PFI & B2600i | Behind Left Kick Panel |
| Miata | Left Of Steering Column |
| MX-6 & 626 | Near Fuse Block, On Relay Panel |
| 929 | In Underhood Fuse Block |