LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1992 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Pressure Release >> Navajo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System Pressure Release: Navajo

  1. Disconnect negative battery cable. Remove snow/ice shield. Remove air intake tube between air cleaner and throttle body. Remove fuel filler cap to release fuel tank pressure. Connect Fuel Pressure Gauge (49-UN01-010) to relief valve (Schrader valve) on fuel supply manifold, near fuel pressure regulator. See Figure .
  2. As an alternate method, disconnect inertia switch connector, behind instrument panel, under radio. Start engine, and operate it until it stalls.
scientia non olet · About LEMON Manuals