Main Switch

Disconnect main switch connector. With main switch in specified position, check continuity between main switch connector terminals. See MAIN SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace main switch.

MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals

OFF

"A" & "F"; ⁽¹⁾ "B" & "C"

"A" & "B"; ⁽¹⁾ "B" & "C"

⁽¹⁾	Apply battery voltage across these terminals to test switch backlighting or indicator light.

Fig 1: Main Switch Connector Terminal ID

Courtesy of MAZDA MOTORS CORP.