Main Switch

Disconnect main switch connector. With main switch in specified position, check continuity between main switch connector terminals. See MAIN SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace main switch.

MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals

Neutral

"D" & "F"; ⁽¹⁾ "G" & "H"

OFF

⁽¹⁾ "G" & "H"

"A", "D" & "F"; ⁽¹⁾ "B" & "F"; ⁽¹⁾ "G" & "H"

⁽¹⁾	Apply battery voltage across these terminals to test switch backlighting or indicator light.

Fig 1: Main Switch Connector Terminal ID

Courtesy of MAZDA MOTORS CORP.