Main Switch

Disconnect the main switch connector. With the main switch in the specified position, check continuity between the main switch connector terminals. Refer to the MAIN SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace main switch.

MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals

OFF

⁽¹⁾ "I" & "K"

Neutral

"H" & "L"; ⁽¹⁾ "I" & "K"

"F", "H" & "L"; ⁽¹⁾ "B" & "L"; ⁽¹⁾ "I" & "K"

⁽¹⁾	Apply battery voltage across these terminals to test switch backlighting or indicator light.

Fig 1: Main Switch Connector Terminal ID

Courtesy of MAZDA MOTORS CORP.