LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> B2300 SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays & Solenoids >> Relays >> EEC Power Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EEC Power Relay

Remove relay from vehicle. Connect battery voltage to terminal "C". See Figure. Ground terminal "D". Measure resistance between terminals "A" and "B". Resistance should be less than one ohm with power applied. Continuity should not exist with power removed.

NOTE: For additional testing, see CIRCUIT TEST B in TESTS W/CODES article in the ENGINE PERFORMANCE section.
scientia non olet · About LEMON Manuals