Servicing - A/T: Identification
NOTE:
On models with anti-theft radio system, obtain code number from customer to deactivate radio anti-theft system BEFORE disconnecting negative battery cable. To deactivate radio anti-theft system, turn ignition switch to ACC position. Press FF and REW buttons simultaneously until "cod e" is displayed. Press FF and REW buttons again until 4 bars are displayed. Use preset button No. 1 to enter first number. Use preset buttons No. 2, 3 and 4 to set other numbers. Press FF and REW buttons for about 2 seconds until a beep is heard. After 5 seconds, flashing "cod e" will go away and radio will operate.
AUTOMATIC TRANSMISSION APPLICATIONS
| Model | Transmission | |
|---|---|---|
| 2.6L | N4A-HL | |
| 3.0L | ||
| 2WD | R4A-EL | |
| 4WD | R4AX-EL | |
TRANSFER CASE APPLICATIONS
| Model | Transfer Case |
|---|---|
| 4WD | R4AX-EL |