Component Testing: Sub-Switch

Check continuity across specified terminals of sub-switch connector with main switch button held in specified position. See SUB-SWITCH CONTINUITY TEST table. SeeFigure . Replace sub-switch if continuity is not as specified.

SUB-SWITCH CONTINUITY TEST

Application & Switch Position

Continuity Between Terminals

No. 1 & 5; 3 & 4 (⁽¹⁾ 2)

Off (Neutral)

No. 1 & 2; 3 & 4 (⁽¹⁾ 5)

DOWN

No. 1 & 2; 4 & 5 (⁽¹⁾ 3)

⁽¹⁾	There should be no continuity between this terminal and any other terminal.