Abs Control Module Test

WARNING: This page is about a different car, the 1996 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Test ABS Control Module (ABS CM) using DVOM and Adapter Harness (49-L066-001) connected to ABS CM connector. Measure voltage between applicable terminal and terminal "A" (ground) of ABS CM connector. See Fig 1 . If voltage, continuity or resistance is not as specified, replace ABS CM. See Fig 2 and Fig 3 .

Fig 1: Identifying ABS Control Module Connector Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 2: Testing ABS Control Module (1 Of 2)

Courtesy of MAZDA MOTORS CORP.

Fig 3: Testing ABS Control Module (2 Of 2)

Courtesy of MAZDA MOTORS CORP.