LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> MX-3 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Transmission Range Sensor/Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Range Sensor/Switch

NOTE: Transmission range switch is equipped.
  1. Place gearshift lever in "N" position. Ensure gearshift lever is adjusted correctly. See GEARSHIFT LEVER  . Loosen transmission range switch mounting bolts at transmission. Remove screw from alignment pin hole at bottom of switch (if equipped).
  2. Place manual lever in Neutral. Line up neutral mark on switch with manual lever.
  3. Tighten mounting bolts to specification. See TORQUE SPECIFICATIONS  . Remove alignment pin. Install alignment pin hole screw (if equipped) and check switch operation. Vehicle should start only with gearshift in "P" or "N" position.
scientia non olet · About LEMON Manuals