LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Anti-Lock Brake System) >> Component Testing >> Abs Control Module Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Control Module Test

WARNING: This page is about a different car, the 1996 Mazda Millenia and 1995 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.

ABS control module is located behind left side of instrument panel. Unless indicated otherwise, test with ignition on and ABS control module connector connected. Measure voltage between ground and applicable terminal of ABS control module connector. If voltage is not as specified, check appropriate component listed under INSPECTION POINT. See Fig 1 through Fig 6 . If components are okay, replace ABS control module.

Fig 1: Testing ABS Control Module Without Traction Control System (1 Of 2)
G96A20222Courtesy of MAZDA MOTORS CORP.
Fig 2: Testing ABS Control Module Without Traction Control System (2 Of 2)
G96B20223Courtesy of MAZDA MOTORS CORP.
Fig 3: Testing ABS Control Module With Traction Control System (1995 - 1 Of 2)
G97I08514Courtesy of MAZDA MOTORS CORP.
Fig 4: Testing ABS Control Module With Traction Control System (1995 - 2 Of 2)
G97B08515Courtesy of MAZDA MOTORS CORP.
Fig 5: Testing ABS Control Module With Traction Control System (1996 - 1 Of 2)
G96F20193Courtesy of MAZDA MOTORS CORP.
Fig 6: Testing ABS Control Module With Traction Control System (1996 - 2 Of 2)
G96G20194Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals