LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> RX-7 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Transmission Range Sensor/Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Range Sensor/Switch

NOTE: Transmission range switch is equipped.
  1. Place gearshift lever in "N" position. Ensure gearshift lever is adjusted correctly. See GEARSHIFT LEVER  . Loosen transmission range switch mounting bolts at transmission. Remove screw from alignment pin hole at bottom of switch (if equipped).
  2. Rotate switch and insert a 5/32" alignment pin (or drill bit) through alignment holes.
  3. Tighten mounting bolts to specification. See TORQUE SPECIFICATIONS  . Remove alignment pin. Install alignment pin hole screw (if equipped) and check switch operation. Vehicle should start only with gearshift in "P" or "N" position.
scientia non olet · About LEMON Manuals