Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION SENSOR
- If the camshaft position sensor or circuit has an open or short, Diagnostic Trouble Code No. PO34O is output.
- If the camshaft position sensor circuit fails, the engine will stall and will not restart.

NOTE: The camshaft position sensor is not adjustable.

REMOVAL / INSTALLATION
1. Disconnect the camshaft position sensor connector.
2. Remove the camshaft position sensor.
3. Install in the reverse order of removal.

Tightening torque 5 - 7 Nm (44 - 62 in. lbs.)