Wire Repair: Notes
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Cab & Chassis, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
To repair damage to sensor wiring and wiring harnesses, note the following conditions and proceed to REPAIR PROCEDURE below.
- All wire splice connections must be staggered at least 2" (50 mm) apart.
- Use appropriate solder (rosin core) and proper size heat shrink tubing for size of wire being spliced.
- All repaired connections must be waterproofed using heat shrink tubing.