Refrigerant Lines Installation Note
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- When installing a new cooler pipe or hose, add a supplemental amount of ND-OIL8 compressor oil from the inlet.
Supplemental amount (approx. quantity)
10 ml {10 cc, 0.3 fl oz}
- Apply compressor oil to the O-rings and connect the joints.
- Tighten the joints.
- Tighten the nut or bolt of the joint by hand.
- Tighten the joint to the specified torque. If it is a nut joint, tighten the nut with a wrench and torque wrench.