Cruise Control Switch
WARNING:
Deactivate air bag system before performing any service operation. See AIR BAG RESTRAINT SYSTEM
article for 1995 models or see AIR BAG RESTRAINT SYSTEM
article for 1996 models. DO NOT
apply electrical power to any component on steering column without first deactivating air bag system. Air bag may deploy.
At combination switch, disconnect 4-pin connector leading to cruise control switch. Check switch function between specified terminals of cruise control switch connector with switch activated. See CRUISE CONTROL SWITCH TEST . SeeFig 1 . If switch function is not as specified, replace cruise control switch. If switch function is as specified, check and repair wiring between cruise control switch and cruise control unit.
CRUISE CONTROL SWITCH TEST
| Switch | Terminals | Specification | |
|---|---|---|---|
| 1995 | |||
| SET | SE & "E" | Continuity | |
| RESUME/ACCEL | RE & "E" | Continuity | |
| COAST | CO & "E" | Continuity | |
| 1996 | |||
| SET/COAST | CO & "E" | 240 Ohms | |
| RESUME/ACCEL | CO & "E" | 910 Ohms | |