Specifications Index
(MPV) SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut (Front) | 174-231 Ft. Lbs. (236-313 N.m) | ||
| Battery | See BATTERY SPECIFICATIONS table under CAPACITIES . | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | DESCRIPTION & OPERATION | ||
| Torque | GENERATOR & REGULATOR - MITSUBISHI | ||
| Drive Belts | |||
| Adjustment | ADJUSTMENT SPECIFICATIONS | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 11-15 psi (0.75-1.05 kg/cm2 ) | ||
| Thermostat R & I | 14-18 ft. lbs. (19-25 N.m) | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| 3.0L V6 | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | 13-35 psi (0.9-2.5 kg/cm2 ) at 1000 RPM, and 53-75 psi (3.7-5.3 kg/cm2 ) at 3000 RPM | ||
| Overhaul | OVERHAUL | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 76-81 Ft. Lbs. (103-110 N.m) | ||
| Fuel System | |||
| Pressure Specification (Regulated) | |||
| At Idle W/ Vacuum | 30-37 psi (2.1-2.6 kg/cm2 ) | ||
| At Idle W/O Vacuum | 38-46 psi (2.7-3.2 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location and R & I | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 3.0L V6 | FIRING ORDER | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plug | |||
| 3.0L V6 (ZFR5F-11 or ZFR6F-11) | |||
| Gap | 0.040-0.043 in. (1.0-1.1 mm) | ||
| Torque | 11-16 Ft. Lbs. (15-22 N.m) | ||
| Starting | |||
| Starter | DESCRIPTION & OPERATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65-87 Ft. Lbs. (88-118 N.m) | ||