Drive Mode
WARNING: This page is about a different car, the 1997 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Start the engine and drive the vehicle:
- Drive in stop-and-go traffic for 20 minutes with at least 4 idle periods
- Drive on expressway or highway for 10 to 15 minutes. Access and monitor the IAT PID on the scan tool during the entire highway drive. Heavy accelerations, sudden decelerations or wide open throttles are not recommended on any vehicle.
- Access the On-Board Readiness Menu on the scan tool to check monitor completion status.
- Rerun Continuous Memory Self-Test to check code P1000 status.