Continuous Memory Self-Test (Expanded Mode)

WARNING: This page is about a different car, the 1997 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps:

Select vehicle and engine selection menu. See Fig 1.
Select year, engine, model and any additional information requested by scan tool.
Select DIAGNOSTIC DATA LINK.
Select PCM - POWERTRAIN CTRL MODULE.
Select DIAGNOSTIC TEST MODES.
Select RETRIEVE/CLEAR CONTINUOUS DTCs.
Turn ignition on.
Follow operating instructions from scan tool menu.

Fig 1: Identifying New Generation Star (NGS) Main Menu & Mode Paths

Courtesy of FORD MOTOR CO.