Main Switch

Disconnect main switch connector. Check continuity between specified terminals of main switch with switch in specified position. See MAIN SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace main switch.

MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals

OFF

⁽¹⁾ A & B; ⁽¹⁾ D & E

⁽¹⁾ A & B; C, D & E; ⁽¹⁾ D & E

⁽¹⁾	Apply battery voltage across these terminals to test switch backlighting or indicator light.

Fig 1: Identifying Main Switch Terminals

Courtesy of MAZDA MOTORS CORP.