Using SST (104 Pin Breakout Box)

CAUTION: The PCM terminal voltages vary with change in measuring conditions and vehicle conditions. Always carry out a total inspection of the input systems, output systems and PCM to determine the cause of trouble. Otherwise, some incorrect diagnosis would be made.

USING 104 PIN BREAKOUT BOX
1. Disconnect the negative battery cable.
2. Disconnect the PCM connector.




3. Connect the SST (104 Pin Breakout Box) to the PCM as shown.
4. Tighten the connector bolt.

Tightening torque: 7.9 - 10.7 Nm (80 - 110 kg.m, 69.5 - 95.4 in.lb.)

5. Connect the negative battery cable.
6. Measure the voltage at each terminal.
- If any incorrect voltage is detected, check related systems, wiring harnesses and connectors referring to the possible malfunction in the terminal voltage list.

Terminals 1 Thru 6:

Terminals 7 Thru 23:

Terminals 24 Thru 40:

Terminals 41 Thru 60:

Terminals 61 Thru 77:

Terminals 78 Thru 91:

Terminals 92 Thru 104:

TERMINAL REFERENCE VOLTAGE