LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1999 >> Protege ES, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Component Tests >> Cruise Control Module >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Module: Notes

  1. On Protege, locate cruise control module behind right kick panel. On MX-5 Miata, locate cruise control module behind left kick panel. On all models, leave cruise control module harness connector attached unless otherwise specified.
  2. Using DVOM, backprobe specified terminals of cruise control module harness connector while performing appropriate test condition. See CRUISE CONTROL MODULE PIN VOLTAGE CHART (MX-5 MIATA)  or CRUISE CONTROL MODULE PIN VOLTAGE CHART (PROTEGE)  . See Fig 1.
  3. If voltage measurements or continuity measurements are not as specified, check the related components and wiring. See WIRING DIAGRAMS . If related components and wiring are okay, but system is still not functioning properly, replace cruise control module.
Fig 1: Identifying Cruise Control Module Connector Terminals (MX-5 Miata & Protege)
G96D06961Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals