LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> 626 ES, 2.0 C, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Introduction >> Additional System Functions >> Drive Cycles >> OBD-II Drive Cycle Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

OBD-II Drive Cycle Description

OBD-II drive cycle is a pattern of driving in which the PCM will execute all OBD-II diagnostic monitors. Drive cycle can be used to cause a DTC to set if a fault is present or to verify that a DTC will not return after a repair has been completed. If drive cycle is complete and P1000 is not cleared, repeat entire drive cycle.

NOTE: Rough road conditions may prevent certain steady state conditions and steady accelerations from validating the transmission and load related monitors.
scientia non olet · About LEMON Manuals