Panel Light Control Switch Inspection: Notes
WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the panel light control switch. See PANEL LIGHT CONTROL SWITCH REMOVAL/INSTALLATION .
- Connect the negative battery cable.
- Connect the connector to the panel light control switch.
- Measure the voltage at the panel light control switch as indicated below.
- Disconnect the panel light control switch connector before inspecting for continuity at terminal D.
- If not as specified, inspect the parts listed under "Action."
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the panel light control switch.