LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Automatic Transmission [Shift Mechanism)) >> Steering Shift Switch Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Shift Switch Inspection: Notes

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver-side air bag module. (See DUAL-STAGE DRIVER-SIDE AIR BAG MODULE .)
  2. Connect the connector to the steering shift switch.
  3. Connect the negative battery cable.
  4. Measure the voltage at the steering shift switch.
    • When inspecting terminal C for continuity, disconnect the steering shift switch connector.
  5. If the value are not as specified in the TERMINAL VOLTAGE LIST (REFERENCE) , inspect the parts under "Action" and related wiring harnesses.
  6. If the parts inspected under "ACTION" are found to be normal but the system still does not operate normally, replace the up or down switch according to the following conditions:
    • The voltage is normal when the up switch is on and is abnormal when the down switch is on: Replace the down switch.
    • The voltage is normal when the down switch is on and is abnormal when the up switch is on: Replace the up switch.
scientia non olet · About LEMON Manuals