Section 29 (Engine Controls - Pin Voltage/PID Value Charts): Introduction

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Pin voltage charts are used for diagnosing intermittent symptoms and faults that can not be resolved during self-diagnostics. Pin voltage tests ensure Powertrain Control Module (PCM) is receiving and transmitting proper voltage and other signals. PIN voltage charts may be helpful in determining if there is an open or short in wiring harness.

Parameter Identification (PID) values also check input and output signals to determine if PCM is receiving and transmitting proper signals. PID values are retrieved using New Generation Star (NGS), Worldwide Diagnostic System (WDS) or OBD-II compliant scan tool. See PID VALUE TESTING under TEST PROCEDURES.

Before performing pin voltage tests or checking PID values, ensure engine mechanical condition has been thoroughly inspected and self-diagnostics has been attempted. Technical Service Bulletins (TSBs) may also be helpful in correcting a hard to diagnose problem.