LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Symptom Troubleshooting (Engine Control System AJ)) >> Engine Control System Operation Inspection >> EVAP system leak inspection using WDS or equivalent >> Variable Valve Timing Control System Operation Inspection >> When idling cannot be continued
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When idling cannot be continued

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Inspect for each bank
  1. Remove the OCV and verify that the spool valve is at maximum retard position.
  2. Connect the OCV.
  3. Turn the ignition switch to ON position.
  4. Verify that the spool valve is at max. retard position.
    • If the spool valve is stuck in advance direction, inspect the following:
      • Short circuit in harnesses or connectors between the OCV and the PCM.
  5. Inspect the variable valve timing actuator.
scientia non olet · About LEMON Manuals