LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 411 (Security System And Locks System) >> Immobilizer System Reprogram Procedure >> Security Access Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Access Procedure

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When using the SST  (WDS or equivalent) to perform "Ignition Key Code Erase" or "Customer Spare Key Programming Enable/Disable", it is necessary to obtain security access approval.
  1. Connect the SST  (WDS or equivalent).
  2. Select "Tool box", "Body", "Security", and then "PATS Functions" (in this order).
  3. The SST  (WDS or equivalent) will read out an outcode depending on the designated procedure.
    CAUTION:
    • After reading out the outcode, do not turn ignition switch from LOCK to ON position 5 times, otherwise the outcode value will be changed.
  4. Access the Mazda official website to obtain the incode that corresponds to the outcode. Refer to Service Information Ref. No. A001/02 for details of this procedure.
  5. Input the incode to the SST  (WDS or equivalent).
  6. Verify that the security access procedure finishes normally.
scientia non olet · About LEMON Manuals